Titanium Tees & Crosses

Pipe Fitting Capability

All of Range of Titanium Titanium Tees is based on international ASME standards, Different Grade For Your Refereance

Applications

Titanium Tees & Crosses are used in piping systems to provide a leak-proof connection between two pipes or fittings. They are typically used in conjunction with a lap joint flange to make a flanged connection.

The advantage of using titanium stub ends is that titanium is a highly corrosion-resistant and lightweight material. It is also biocompatible, making it ideal for use in medical and pharmaceutical applications. In addition, titanium has a high strength-to-weight ratio, which makes it an ideal material for use in applications where weight is a concern. It also has excellent heat resistance, making it ideal for use in high-temperature environments.

Overall, the use of titanium stub ends can provide a reliable, long-lasting connection that is resistant to corrosion and other forms of degradation, making them an ideal choice for a wide range of industrial and commercial applications.

Shaanxi kelichi & Phaeton Can privde you the Ti-Stub ends based on ASME B16.9 – Directly Factory Made welding Fittings to ensure the sizes and properties are appropriate for your project , Contact Us For More information

ASME B16.9 Standard

ASME B16.9 is a standard developed by the American Society of Mechanical Engineers (ASME) for factory-made wrought steel buttwelding fittings. The standard covers dimensions, tolerances, materials, markings, and testing requirements for a wide range of buttwelding fittings, including elbows, tees, reducers, caps, and crosses.

The ASME B16.9 standard is widely used in industries such as petrochemical, chemical, power generation, and oil and gas. It provides guidelines for the design and manufacture of buttwelding fittings that meet high standards of quality and reliability.

The standard specifies the dimensions of the fittings, such as outside diameter, wall thickness, and center-to-end dimensions. It also covers tolerances for these dimensions and specifies the materials that can be used for the manufacture of buttwelding fittings.

ASME B16.9 also provides guidelines for marking the fittings to indicate the manufacturer’s name, material, size, and other important information. Additionally, the standard outlines testing requirements, such as hydrostatic testing, to ensure that the fittings meet the necessary performance standards.

Overall, ASME B16.9 is an important standard that helps ensure the safe and reliable operation of piping systems in a wide range of industries.

Tees & Crosses Dimensions

kelichi phaeton Tees & Crosses Dimensions
Nominal Pipe Size Outside diameterat bevel Center-to-End Center-to-End
Nominal Pipe Size Outside diameterat bevel Run (C) Outlet(M)
1/2″ 21.3 25 25
3/4″ 26.7 29 29
1″ 33.4 38 38
1 1/4″ 42.2 48 48
1 1/2″ 48.3 57 57
2″ 60.3 64 64
 1/2″ 73.0 76 76
3″ 88.9 86 86
3 1/2″ 101.6 95 95
4″ 114.3 105 105
5″ 141.3 124 124
6″ 168.3 143 143
8″ 219.1 178 178
10″ 273.0 216 216
12″ 323.8 254 254
14″ 355.6 279 279
16″ 406.4 305 305
18″ 457.0 343 343
20″ 508.0 381 381
22″ 559.0 419 419
24″ 610.0 432 432
Nominal Pipe Size Outside diameterat bevel Center-to-End Center-to-End
Nominal Pipe Size Outside diameterat bevel Run (C) Outlet(M)
1/2″ 21.3 25 25
3/4″ 26.7 29 29
1″ 33.4 38 38
1 1/4″ 42.2 48 48
1 1/2″ 48.3 57 57
2″ 60.3 64 64
 1/2″ 73.0 76 76
3″ 88.9 86 86
3 1/2″ 101.6 95 95
4″ 114.3 105 105
5″ 141.3 124 124
6″ 168.3 143 143
8″ 219.1 178 178
10″ 273.0 216 216
12″ 323.8 254 254
14″ 355.6 279 279
16″ 406.4 305 305
18″ 457.0 343 343
20″ 508.0 381 381
22″ 559.0 419 419
24″ 610.0 432 432
Nominal Pipe Size (NPS) DN Outside Diameter at Bevel Center- to-End Center- to-End
Nominal Pipe Size (NPS) DN Outside Diameter At Bevel Run.C Outlet. M[Notes(1) and (2)]
1/2 15 21.3 25 25
3/4 20 26.7 29 29
1 25 33.4 38 38
1-1/4 32 42.2 48 48
1-1/2 40 48.3 57 57
2 50 60.3 64 64
2-1/2 65 73.0 76 76
3 80 88.9 86 86
3-1/2 90 101.6 95 95
4 100 114.3 105 105
5 125 141.3 124 124
6 150 168.3 143 143
8 200 219.1 178 178
10 250 273.0 216 216
12 300 323.8 254 254
14 350 355.6 279 279
16 400 406.4 305 305
18 450 457 343 343
20 500 508 381 381
22 550 559 419 419
24 600 610 432 432
26 650 660 495 495
28 700 711 521 521
30 750 762 559 559
32 800 813 597 597
34 850 864 635 635
36 900 914 673 673
38 950 965 711 711
40 1000 1016 749 749
42 1050 1067 762 711
44 1100 1118 813 762
46 1150 1168 851 800
48 1200 1219 889 838
Nominal Pipe Size (NPS) DN Outside Diameter at Bevel Center- to-End Center- to-End
Nominal Pipe Size (NPS) DN Outside Diameter At Bevel Run.C Outlet. M[Notes(1) and (2)]
1/2 15 21.3 25 25
3/4 20 26.7 29 29
1 25 33.4 38 38
1-1/4 32 42.2 48 48
1-1/2 40 48.3 57 57
2 50 60.3 64 64
2-1/2 65 73.0 76 76
3 80 88.9 86 86
3-1/2 90 101.6 95 95
4 100 114.3 105 105
5 125 141.3 124 124
6 150 168.3 143 143
8 200 219.1 178 178
10 250 273.0 216 216
12 300 323.8 254 254
14 350 355.6 279 279
16 400 406.4 305 305
18 450 457 343 343
20 500 508 381 381
22 550 559 419 419
24 600 610 432 432
26 650 660 495 495
28 700 711 521 521
30 750 762 559 559
32 800 813 597 597
34 850 864 635 635
36 900 914 673 673
38 950 965 711 711
40 1000 1016 749 749
42 1050 1067 762 711
44 1100 1118 813 762
46 1150 1168 851 800
48 1200 1219 889 838