Titanium Bar Production Capability
Ti Production Standard: ASTM B348, ASME SB348, ASTM F67, ASTM F136, ISO5832-2, ISO5832-3, AMS 4928, AMS 2631b
Ti Grades: Gr 1, 2, 3, 4, 5 (6Al-4V), 6, 7 (Ti-0.15Pd), 9 (3Al-2.5V), Grade 12, 23 (6AL-4V ELI) (6Al
Ti Bar Dimensions: Diameter 8 – 400 mm
Ti Bar Shape: Ti Square Bar, Ti Round Bar,
Ti Hexagonal Bar
Ti Bar Surface Finish: Black, Pickling, Sand-blasting
Monthly Output: 2000 tonnes
Applications
Titanium bars are used extensively in medical, aerospace and chemical industries, providing requisite strength to weight properties need to ensure extreme conditions and heavy usage without corrosion or failure. Shaanxi Standard Titanium Co also provide titanium rods for use in advanced electronic products for the consumer market. Some examples of where are titanium bars are being used:
Dental Fittings
Structural Implants
Prosthetics
Fasteners for aerospace
To find out more about our where we currently supply to contact us today and our team will be happy to provide further information and references.
Dimensional Tolerances for Titanium Bars
The table below details the differing diameter tolerances for the differing lengths of titanium bar. These are aligned to internationally recognised engineering standards. The differing production methods define the range of diameters for each approach.
| Titanium Bar Diameter Tolerances Per Length |
|---|
| Specified Size, in. (mm) | Size Variations, in. (mm) |
Out-of-Round / Out-of-Square in. (mm) |
|---|---|---|
| 1⁄4to 5⁄16 (6.35 to 7.94), inc | +/-0.005 (0.13) | 0.008 (0.20) |
| Over 5⁄16 to 7⁄16 (7.94 to 11.11), inc | +/-0.006 (0.15) | 0.009 (0.23) |
| Over 7⁄16 to 5⁄8 (11.11 to 15.88), inc | +/-0.007 (0.18) | 0.010 (0.25) |
| Over 5⁄8 to 7⁄8 (15.88 to 22.22), inc | +/-0.008 (0.20) | 0.012 (0.30) |
| Over 7⁄8 to 1 (22.22 to 25.40), inc | +/-0.009 (0.23) | 0.013 (0.33) |
| Tensile Properties |
|---|
| Grade |
Tensile Strength min ks |
Tensile Strength min Mpa |
Yield Strength 0.2% Offset, min, ksi |
Yield Strength 0.2% Offset, min, MPA |
Yield Strength 0.2% Offset, max, ksi |
Yield Strength 0.2% Offset, max, MPA |
Elongation In 2 in. or 50 mm Min % |
|---|---|---|---|---|---|---|---|
| 1 | 35 | (240) | 25 | (170) | 45 | (310) | 24 |
| 2 | 50 | (345) | 40 | (275) | 65 | (450) | 20 |
| 3 | 65 | (450) | 55 | (380) | 80 | (550) | 18 |
| 5 | 130 | (895) | 120 | (828) | 10 | ||
| 5B | 60 | (1103) | 150 | (1034) | 6 |
